Preparation
Positioning the Projector
–This projector is designed to project on a flat projection surface.
–The projector can be focused from 4.3’(1.3m) to 21.3’(6.5m).
–Refer to the figure below to adjust a screen size.
A : B = 9 : 1
Note:
The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image.
21.3’ (6.5m)
16.1’ (4.9m)
|
| 10.6’ (3.2m) |
| 200” |
|
|
|
|
|
| |
| 4.3’ (1.3m) |
| 150” | Max. Zoom |
|
|
|
| 169” |
| |
|
|
| 100” | A | |
|
|
| Min. Zoom | ||
|
|
| 127” |
| |
|
|
|
|
| |
| 40” |
| 83” |
|
|
|
|
|
|
| Center |
| 34” |
|
|
| B |
|
|
|
|
| |
Screen Size | 34" | 40” | 100” | 150” | 200” |
(W x H) mm | 691 x 518 | 813 x 610 | 2032 x 1524 | 3048 x 2286 | 4064 x 3048 |
4 : 3 aspect ratio | |||||
Zoom (min) | 4.3’ (1.3m) | 4.9' (1.5m) | 12.5' (3.8m) | 19.0' (5.8m) | |
Zoom (max) | 4.3’ (1.3m) | 10.6’ (3.2m) | 16.1' (4.9m) | 21.3’ (6.5m) |
Adjustable Feet
Picture tilt and projection angle can be adjusted by rotating the adjustable feet. Projection angle can be adjusted at 8.0 degrees.
1 | Lift the front of the projector and pull the feet lock latches on |
| the both sides of the projector. |
2 | Release the feet lock latches to lock the adjustable feet and |
| rotate them to adjust position and tilt. |
3 | To retract the adjustable feet, lift the front of the projector |
| and pull and undo the feet lock latches. |
Keystone distortion of the projected image can be adjusted by Menu Operation. ( ☞ P20 and P36 )
CAUTION
|
| Feet Lock |
Tilt the projector within the adjustable angle not to shorten the lamp life. | Adjustable Feet | Latches |
Proper angle should be taken.
13