Setting
46
Power management
For reducing power consumption as well as
maintaining the lamp life, the Power management
function turns off the projection lamp when the
projector is not used for a certain period.
When the input signal is interrupted and no button is
pressed for more than 30 seconds, the timer display
with "No signal" appears. The countdown starts to turn
off the lamp.
Select one of the operations:
Ready. . . . . . . . Whe n t he la mp ha s bee n ful ly
cooled down, the POWER indicator
changes to green blinking. In
this condition, the projection lamp
is t urned on if the input signal is
reconnected or any button on the
remote control is pressed.
Shut down . . . . Whe n the l amp ha s bee n ful ly
cooled down, the power is turned
off.
Off . . . . . . . . . . Power management function is off.
Then set the countdown timer with the Point ◄►
buttons.
Time left before Lamp is off.
Press the SELECT button
at Power management
and this box appears.
Choose one of three
settingswiththePoint◄
►buttons,andgotothe
timer with the Point ▲▼
buttons and set time with
the Point ◄►buttons.
Power management
Note:
Factory default is “Ready: 5 min.”