Sanyo PLC-XF20 manual 12

CONNECTING THE PROJECTOR

	INPUT/OUTPUT TERMINALS AND JACKS
INPUT 2	INPUT 1	INPUT 1/2/3/4

5 BNC INPUT JACKS	DVI INPUT TERMINAL
Connect the component video output	Connect the computer output
(Cr, Y, Cb or Pr, Y, Pb) from the video	(Digital/Analog DVI-I type) to
equipment to the R/Pr, G/Y and B/Pb	this terminal.
jacks or connect the computer output [5	(Refer to P14.)
BNC Type (Red, Green, Blue, Horiz.
Sync and Vert. Sync.)] from the
computer to the R/Pr, G/Y, B/Pb, H/HV
and V jacks. (Refer to P14, 15)

SERIAL PORT IN				DVI			AUDIO	L	CONTROL PORT
							R
							(MONO)
SERIAL PORT OUT		R/Pr	G/Y	B/Pb	H/HV	V	AUDIO		CONTROL PORT
							R	L
							(MONO)
R/C JACK	USB	VIDEO/Y	C		S-VIDEO		AUDIO
							R	L
							(MONO)
AUDIO OUT							AUDIO		CONTROL PORT
R	L		ANALOG RGB
							R	L
	RESET
	(MONO)						(MONO)

INPUT 3 INPUT 4

AUDIO INPUT JACKS

Connect the audio output from the computer or video equipment to these jacks. (Refer to P14, 15.)

INPUT 1

2	INPUT 1/2/4
INPUT
	CONTROL PORT CONNECTORS
	When controlling the computer
3	with the Remote Control of
	this projector, connect the
INPUT
	mouse port of your personal
	computer to these connectors.
	(Refer to P14.)
INPUT 4

INPUT 3

AV INPUT (VIDEO/Y, C) JACKS	HDB 15-PIN INPUT TERMINAL
Connect the computer output
	Connect the composite video output
from the video equipment to the	(Analog HDB 15-pin type) to
VIDEO/Y jack or connect the Separate	this terminal.
Y/C video outputs to the VIDEO/Y and	(Refer to P14.)
C jacks. (Refer to P15.)

S-VIDEO INPUT JACK

Connect the S-VIDEO output from the video equipment to this jack. (Refer to P15.)

12