COMPUTER MODE
1 |
| Press the MENU button and the |
| appear. Press the POINT LEFT/RIGHT buttons to select IMAGE | |
|
| and press the SELECT button. Another dialog box PICTURE |
|
| |
|
| IMAGE ADJUSTMENT Menu will appear. |
2 |
|
|
| Press the POINT DOWN button and a | |
| appear. Move the arrow to the function that you want to select |
and then press SELECT button.
Standard
Normal picture level preset on this projector. This picture level can be set by pressing the NORMAL button.
Real
Picture level adjusted for the picture with fine tone.
Custom
Picture level adjusted manually in the custom setting dialog box.
When selecting “▼” the custom setting dialog box will appear. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN button, and adjust each value by pressing the SELECT button to match with the image.
Fine sync
Adjust the picture as necessary to eliminate flicker from the display. (From 0 to 255.)
Total dots
The number of the total dots in one horizontal period. Adjust the number to match your PC image.
White balance (Red / Green / Blue)
Move the arrow to the color that you want to adjust. Point to ▼ to lighten the color and select ▲ to deepen the color. (From 0 to 63.)
Contrast
Point to ▼ to decrease contrast, and select ▲ to increase contrast. (From 0 to 63.)
Brightness
Point to ▼ to adjust the image darker, and select ▲ to adjust brighter. (From 0 to 63.)
Sharpness
Point to ▼ to soften the image, and select ▲ to sharpen the image. (From 0 to 15.)
Gamma
Point to ▼ or ▲ to obtain better balance of contrast. (From 0 to 16.)
Progressive
Set “On” to provide progressive scan mode.
Each of the keys operates as follow.
Reset Recalls the data previously adjusted.
Stored Stores the adjusted data in the memory.
Quit |
|
|
| Closes the PICTURE IMAGE ADJUSTMENT Menu. |
Move the arrow to the level and press the SELECT button.
The level being selected.
Press the SELECT button at “▼” to adjust the picture level manually.
Move the arrow to ▲ or ▼ and press SELECT button.
| Press the SELECT | |
Close the PICTURE IMAGE | button to set the | |
function “On” or “Off”. | ||
ADJUSTMENT Menu. |
NOTE : The Fine sync and the Total dots cannot be operated when the input signal is digital from DVI terminal or “RGB” is selected on the SYSTEM MENU (P28 and 29).
The Progressive cannot be selected when the input signal is digital from DVI terminal or “480p” , “575p” or “HDTV720p” is selected on the SYSTEM MENU (P28 and 29).
32