PREPARATION
NAME OF EACH PART OF THE PROJECTOR
FRONT OF THE CABINET
| SPEAKERS |
INFRARED | POWER CORD |
REMOTE RECEIVER | CONNECTOR |
| |
PROJECTION LENS |
|
| MAIN ON / OFF |
LENS COVER | SWITCH |
| CARRYING HANDLE |
| LEVEL AND TILT ADJUST HANDLE |
BACK OF THE CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot. When using or installing the projector, the following precautions should be taken.
●Do not put a flammable object near this vent.
●Keep the rear grills at least 3’ (1m) away from any object, especially
●Do not touch this area, especially screws and metallic parts. This area will become hot while the projector is used.
This projector detects the internal temperature and automatically controls the operating power of the Cooling Fans.
BOTTOM OF THE CABINET
AIR INTAKE VENTS
This projector is equipped with cooling fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover the vent slots.
●Keep bottom clear of any objects. Obstructions may block cooling air.
INFRARED
REMOTE RECEIVER
LAMP COVER
AIR FILTER
ADJUSTABLE FEET
ADJUSTABLE FEET
7