Computer Adjustment

Position

Adjusts picture position.

V-sync phase

Adjust this item when the projected image is affected by the noise from the external equipment. (From 0 to 15)

✔Note:

V-sync phase is not displayed as the item is initially checked off on My menu in the Setting menu. Change the My menu setting in the Setting menu (p51) when necessary to adjust V-sync. phase.

Reset

Resets all adjustments to their previous levels.

Mode

To store the adjustment data or clear the stored data, move the yellow frame pointer to Mode and then press the SELECT button.

Store

To store the adjustment data, select Store and press the SELECT button to display Mode dialog box. Move the yellow frame pointer to any of Mode 1 to 50 in which you want to store and then press the SELECT button.

Free

To clear the adjustment data previously set, select Free and press the SELECT button to display Mode dialog box. Move the yellow frame pointer to any of Mode 1 to 50 in which you want to clear and then press the SELECT button.

Quit

Exits the PC Adjust Menu.

Press the SELECT button at the Display area and the Display area dialog box appears.

To store adjustment data

Vacant Mode

shows the selected input,

 

 

source and system, and values

 

of “Fine sync,” “Total dots,”

 

“Clamp,” “Display area,” and

 

“Position.”

To clear adjustment data

Adjustment Computer

✔Note:

Fine sync. and Display area cannot be selected when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, “1080i/50” or “1080i/60” is selected in the System menu (p40).

43