Input

Input 2

Move a pointer to Input 2 and press the SELECT button.

Source Select Menu

RGB

Video

Y, Pb/Cb, Pr/Cr

When the input source is analog coming from a computer through the Input 2 (5 BNC-type: Red, Green, Blue, H. Sync. and V. Sync.) terminal, select RGB.

When video input signal is connected to the Input 2 (VIDEO) terminal , select Video.

When the input source is component coming from video equipment connected to the Input 2 (Y, Pb/Cb, Pr/Cr) terminal, select Y, Pb/Cb, Pr/Cr.

Move the pointer to RGB, Video or Y, Pb/Cb, Pr/Cr and press the SELECT button.

Input 3

Move a pointer to Input 3 and press the SELECT button.

Video

When video input signal is connected to the

 

Input 3 (VIDEO) terminal, select Video.

 

 

When the input source is component

Y, Pb/Cb, Pr/Cr

 

coming from video equipment connected

 

 

to the Input 3 (Y, Pb/Cb, Pr/Cr) terminal,

 

select Y, Pb/Cb, Pr/Cr.

 

When video input signal is connected to the

S-Video

 

Input 3 (S-VIDEO) terminal, select S-Video.

 

Source Select Menu

Move the pointer to Video, Y, Pb/Cb, Pr/Cr or S-Video and press the SELECT button.

Input 4

When digital PC/AV source is connected to the Warp & Blending board inserted into the Input 4 terminal, the following source menu will be displayed.

RGB (PC Digital)

When the input source is digital coming from a

 

computer through the Input 4 (DVI) terminal,

 

 

select RGB (PC Digital)

 

When the input source compatible with HDCP

RGB (AV HDCP)

 

is coming from video equipment through the

 

 

Input 4 (DVI) terminal, select RGB (AV HDCP).

✔Note:

Warp & Blending board is initially installed into the Input 4 terminal slot. For details on Warp & Blending feature, refer to the enclosed operation manual.

Input 5

A source menu appears corresponding to the board module inserted into the Input 5 terminal.

✔Note:

•Input 4 and Input 5 can not be selected when no interface board is inserted into the respective slots. (p21)

•Input 5 terminal can only accept digital signals.

•Adjusted values or selected settings in Input 4 and Input 5 return to factory default setting when the connected interface boards are removed from those terminal slots.

38