Maintenance and Cleaning

Lamp Replace Indicators

Indicators

READY

LAMP

LAMP 1/2

Projector Condition

REPLACE

 

Green

Red

 

 

Orange

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lamp cannot light up. (The projector is preparing for stand-by or the

 

 

 

 

 

projection lamp is being cooled down. The projector cannot be turned on until

 

 

 

 

 

cooling is completed. )

 

 

 

 

 

 

 

 

 

Slow

 

 

 

 

 

 

 

 

 

 

 

 

The lamp cannot light up. (The lamp has been cooled down enough and the

 

 

 

 

 

projector is in stand-by mode and ready to be turned on with the POWER ON-

 

 

 

 

 

OFF button.)

 

 

 

Slow

 

 

The lamp is not installed in the projector.

Fast

The lamp of which indicator is blinking has been used overtime. Replace the lamp and then reset the Lamp time. The indicator will turn off.

Both

Either lamp cover is not replaced or fit in.

Both of the indicators keeps blinking three times at regular intervals and the projector cannot be turned on.

Slow

Alternate

Cleaning & Maintenance

Slow

One lamp is different from the other in wattage. (For example, installed a lamp on 300W and the other on 100W.) If the POWER button is pressed in this condition, the projector will be turned on with Lamp 1 only and then shut down automatically 1 minute later.

✽When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps with new ones promptly. And then reset the Lamp time after replacement of the lamps. See page 59, 64 and 65.

69