Sanyo PLC-XU74 owner manual How to Operate the On-Screen Menu, Top Control, Remote Control

Menu bar

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. Refer to the following pages regarding each adjustment and setting procedures.

1	Press the MENU button to display the On-Screen
2	Menu.
	Press the Point 7 8 buttons to select a Menu icon
	to adjust and press the Point ed buttons to select
	an item to adjust.
3	Press the SELECT button to show the item data.
	To adjust the data, press the Point 7 8 buttons.
	Refer to the following pages for each adjustment.

To close the On-Screen Menu, press the MENU button again.

✔Note:

The selected item is not active until the SELECT button is pressed.

Top Control

MENU button

POINT buttons (outer ring)

SELECT button

Remote Control

MENU button

POINT buttons

SELECT button
On-Screen Menu	Menu icon

Pointer

(red framed )

Pointer (red framed )

Press the Point ed buttons to move the pointer.

Item

SELECT

button

Item data

Press the Point 7 8 buttons to adjust the value.

Quit

Exit this menu.

20