Sanyo PLC-XU74 owner manual Input Source Selection Component, RGB Scart 21-pin

Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation Top Control

Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

INPUT button

INPUT button Computer 1

Computer 2

Video

✳

Menu Operation

1 Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red framed pointer to the Input Menu icon.

2 Press the Point ed buttons to move the red arrow pointer to Computer 1 and then press the SELECT button.

3 After the Source Select Menu appeared for Computer 1, move the pointer to Component or RGB (Scart) and then press the SELECT button.

Remote Control

COMPUTER button

COMPUTER button

Computer 1

Computer 2 ✳

✳See Note at the bottom of this page.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 1 and press the SELECT button.

Computer

1

Component

RGB (Scart)

When the input source is coming from video equipment connected to the

COMPUTER IN 1/COMPONENT IN terminal with a Component-VGA Cable, select Component.

When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart).

Source Select Menu

Move the pointer to RGB and press the SELECT button.

Video

✔ Note:

• When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.45)

• C o m p u t e r 2 i s n o t d i s p l a y e d w h e n t h e COMPUTER IN 2/MONITOR OUT terminal is set as Monitor out. (p.46)

Input

35