Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on page 70.)

One of the following messages may appear when:

 

The projector cannot recognize the connected

Auto

 

signal conforming to the provided PC Systems.

 

 

Auto is displayed on the System Menu box

 

and the Auto PC Adjustment function works

 

to display proper images. If the image is not

 

projected properly, a manual adjustment is

 

required (pp.30-31).

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on p.63.)

 

The preset system is manually adjusted in the

Mode 1

 

PC adjust Menu. The adjusted data can be

 

 

stored in Mode 1–5(pp.30-31).

 

PC Systems provided in this projector is chosen.

SVGA 1

 

The projector chooses a proper system provided

 

 

in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC System Menu

The PC System Menu Selected system is displayed.

Selecting Computer System Manually

PC system can also be selected manually.

PC System Menu

1

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select Input and

 

then press the Point or the SELECT button.

2

Use the Point ▲▼ buttons to select System and then

 

press the Point or the SELECT button.

3

Use the Point ▲▼ buttons to select the desired system

and then press the SELECT button.

Customized Mode (1–5)set in the PC adjust Menu (pp.30-31).

RGB(Computer 1)

Systems in this dialog box can be selected.

28

Page 28
Image 28
Sanyo PLC-XW200K, PLC-XW250K Computer Input Computer System Selection, Selecting Computer System Manually, PC System Menu