Video Input

Image Mode Selection

Direct Operation

Select the desired image mode among Dynamic, Standard, Cinema, Blackboard (Green), Colorboard, Image 1, Image 2, Image 3 and Image 4 by pressing the IMAGE button on the remote control.

Menu Operation

1

Press the MENU button to display the On-Screen Menu.

 

Use the Point ▲▼ buttons to select Image select and

 

then press the Point or the SELECT button.

2

Use the Point ▲▼ buttons to select the desired item

 

and then press the SELECT button .

Dynamic

For viewing pictures in a bright room.

Standard

Normal picture mode preset on the projector.

Cinema

Picture mode adjusted with fine tone.

Blackboard (Green)

For the image projected on a blackboard.

This mode help enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.

Colorboard

At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.

Image 1–4

For viewing with the user preset image mode in the Image Adjust Menu (see pages 40-41). This Image memory is provided in each computer, scart, component, S-video and video input source.

Remote Control

IMAGE button

Image select Menu

IMAGE button Dynamic

Standard

Cinema

Blackboard (Green)

Colorboard

Image 1

Image 2

Image 3

Image 4

39

Page 39
Image 39
Sanyo PLC-XW250K, PLC-XW200K owner manual Video Input Image Mode Selection, Cinema