Sanyo PLC-XW200K, PLC-XW250K Video Input, Input Source Selection Video, S-video, Input Menu

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video or S-videoby pressing the VIDEO or the S-VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

Remote Control

VIDEO button

Video

S-VIDEO button S-video

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼buttons to select Video and then
	press the SELECT button.
3	or
	Use the Point ▲▼ buttons to select Computer 1. And
	then press the Point ► button to access the submenu
	items. Use the Point ▲▼ buttons to select the S-video
	and then press the SELECT button.

	When video input signal is connected to the
Video
	VIDEO jack, select Video.
	When video input signal is connected to the S-
S-video
	VIDEO jack, select S-video.

Note:

When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.44).

Input Menu

or

Computer 1

36