Setting

Ceiling

When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Ceiling

Rear

Terminal

 

 

 

The COMPUTER IN 2/MONITOR OUT terminal on the back

Terminal

of the projector is switchable for computer input or monitor

 

output. (See page 9) Select Computer 2 or Monitor Out

 

with the Point ▲▼ buttons.

 

Computer 2

.

computer input

 

Monitor Out

.

monitor out

 

Terminal function is not available when selecting Computer 2 to the input source. Change the input source to the others (Computer 1, and so on) so that the Terminal function will be available. (p.25, 36, 37)

49

Page 49
Image 49
Sanyo PLC-XW250K, PLC-XW200K owner manual Ceiling, Rear, Terminal, Computer, Monitor Out