Computer Input

Input Source Selection

Direct Operation

Choose Computer by pressing the INPUT button on the top control or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below.

Menu Operation

1

Press the MENU button to display the On-Screen

 

Menu. Press the Point ◄► buttons to move the

 

red framed pointer to the Input Menu icon.

2

Press the Point ▲▼ buttons to move the red

 

arrow pointer to Computer, and then press the

 

SELECT button.

3

After the Source Select Menu appeared for

 

Computer, move the pointer to RGB and then

press the SELECT button.

Note:

When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.45)

Top Control

INPUT button

INPUT button

Computer

Video

Remote Control

COMPUTER button

Input Menu

Input Menu icon

Move the pointer (red arrow) to Computer and press the SELECT button.

Computer

Source Select Menu

Move the pointer to RGB and press the SELECT button.

25

Page 25
Image 25
Sanyo PLC-XW56 owner manual Computer Input, Input Source Selection, Direct Operation, Source Select Menu