Sanyo PLC-XW56 owner manual Input Source Selection S-Video, Component, RGB Scart 21-pin

Video Input

Input Source Selection (S-Video, Component, RGB Scart 21-pin)

Direct Operation	Top Control
Choose Computer by pressing the INPUT button on	INPUT button
	INPUT button
the top control or press the COMPUTER button on the
remote control.	Computer
Before using these buttons, correct input source should
be selected through Menu operation as described	Video
below.

Remote Control

COMPUTER button

COMPUTER button

Computer

Menu Operation

1 Press the MENU button to display the On-Screen Menu. Press the Point ◄► buttons to move the red framed pointer to the Input Menu icon.

2	Press the Point ▲▼ buttons to move the red arrow
	pointer to Computer and then press the SELECT
	button.
3	A f t e r t h e S o u r c e S e l e c t M e n u a p p e a r e d
	for Computer, move the pointer to S-Video,
	Component or RGB (Scart) and then press the
	SELECT button.
		W h e n S - v i d e o i n p u t s i g n a l i s
	S-Video
		connected to the COMPUTER IN/
		S-VIDEO IN/COMPONENT IN jack,
		select S-Video.

Component When the input source is coming from video equipment connected to the COMPUTER IN/S - VIDEO IN/COMPONENT IN terminal with

aComponent-VGA Cable, select Component.

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer and press the SELECT button.

Computer

Source Select Menu

Move the pointer to

S-Video, Component or

RGB (Scart) and press the

SELECT button.

RGB (Scart)

Note:

When the input source is coming from video equipment connected to the COMPUTER IN/S-VIDEO IN/ COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

When the Input Search function is set On1 or On2, the input signal will be searched automatically (p.45)

35