Sanyo PLV75L/PLV-80L Color Selection Mode, List Mode, Color M, Menu, Color Palette, All Del

PICTURE IMAGE

4	To move a red frame pointer to "MENU", and then press the
	SELECT button. The COLOR MANAGEMENT menu will be

exited and the display will return to the IMAGE ADJUST menu. (At this time, the image will stop being paused and normal pro- jection will resume.) After changing the COLOR MANAGE- MENT settings, use the IMAGE ADJUST menu to store the changed settings.

COLOR SELECTION MODE

COLOR M.

The mode will return to the pointer mode (even if you press the MENU key on the projector or the remote control). (You will need to reselect and re-adjust the color in this case.)

MENU

COLOR SELECTION

MODE

Level and phase	Gamma
adjustment palette.	adjustment palette.

The COLOR MANAGEMENT menu will be exited and the display will return to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select "LIST" using the POINT buttons and change to the next mode (LIST mode).

LIST MODE

The check mark will be cleared and the effect of the setting adjustment for that line on the projected images will be momentarily canceled.

COLOR PALETTE

LIST

LIST MODE

COLOR M. MENU

COLOR PALETTE

DEL

The mode will return to COLOR SELECTION mode so that you can re-adjust the setting for the color in that line. This option is not avail- able if the check mark has been cleared by the operation immediate- ly above.)

DEL

The setting adjustment for the color in that line will be canceled.

ALL DEL

The setting adjustment for the colors in all lines will be canceled.

COLOR M.

The mode will return to POINTER mode.

Auto picture control

Press either POINT LEFT button or POINT RIGHT button to Auto picture control position that you want to select . (Off, L1 or L2)

Off ······· Auto picture control OFF position.

L1 ········ Auto picture control LEVEL 1 position.

L2 ········ Auto picture control LEVEL 2 position.

ALL DEL MENU COLOR M.

NOTE;

If you press the COLOR M. button on the remote control, the COLOR MANAGEMENT menu will be exited and the display will return to the normal projection screen, but any settings that have been changed will not be stored. To store the changed settings, be sure to select "MENU" using the POINT buttons and store the settings.

36