SETTING
Remote control
This projector provides eight different remote control codes (Code
For example operating the projector in “Code 7”, both the projector and the remote control must be switched to “Code 7”.
To change the code for the projector;
Select a remote control code in this Setting Menu.
To change the code for the remote control;
Check the Reset Switch to "Use position" in the compartment lid on back of the remote control.
And then while holding down the MENU button, press the IMAGE button number of times corresponding to the remote control code for the projector.
To reset the code for the remote control;
Slide the Reset Switch to "Reset position" in the compartment lid on back of the remote control.
Remote control
When pressing the SELECT button at Remote control, the remote control code menu appears.
Use position |
|
|
|
|
|
|
|
|
| Reset position |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
Reset switch
Security
Security
Key lock
This function locks operation of the top control and remote control.
It is useful to prevent operation by an unauthorized person.
···· not locked.
···· locks operation of the top control. To unlock, use the remote control.
···· locks operation of the remote control. To unlock, use the top control.
If the top control accidentally becomes locked and you do not have the remote control nearby, disconnect the AC power cord from the AC outlet, and then with pressing the SELECT button, reinsert the AC power cord. This will cancel the top control lock.
Key lock
Select Key lock and this box appears. Choose one of these with the
POINT UP/DOWN buttons and select [Yes] to activate it.
41
