Sanyo POA-PJNM01 Warning reception setting, When the warning occurs

26

Chapter 3 Basic operation

Warning reception setting

Setting warning reception action type when the warning occurs.

1. Select Warning Reception Setting from System menu. The setting window will appear.

2. Tick the action type “Sound warning alarm” and/or “Display warning dialog”.

Item Description

Sound warning alarm Warning alarm sounds when the warning occurs

Display warning dialog Warning dialog window appears when the warning occurs

3. Click OK to set.

When the warning occurs

If the status change, alert or error occurs and the item “Display warning dialog” is ticked at the warin-

ing reception setting, the following warning information window appears on the screen.

Alert dialog window Status Change dialog window

* The value indicated with red shows the

alert has occur. The value indicated with

blue shows the alert has been resolved.

* Warning value is indicated with green.

Item Description

Number of reception Number of reception times after the warning dialog appears

Contents

Main Page Chapter 1 Introduction Chapter 2 Setup Chapter 3 Basic operation Chapter 4 Advanced setting Page Overview Features System chart Operating environment System requirement Hardware requirement Others Limitation Page Page Software installation Page Page Page Uninstallation Page Launching PJ Master Quitting PJ Master Name of status window Operation Menu tree Menu Sub menu Operation Status display of icons Displays icon according to the target condition or server condition Icon Condition Name of the buttons on the tool bar The following commands are assigned to the buttons on the tool bar. Button Operation When the alert occurs on the target or server Creating the group information Adding the server and target Adding the top server Adding the sub server Important notice on license key entry Page Page Canceling the group information Import the group information from the dened le About error Export the group information System setting Warning reception setting When the warning occurs Encryption setting IP Address setting Customizing the display columns Warning value setting Warning time/temperature setting Global setting Sending a command Default commands for projector TITLE TEXT Default commands for PDP monitor TITLE TEXT Editing the predened command Condition setting Page Viewing the status of target or server Viewing the status, alert and logs Viewing the logs Reading of Error log Viewing the alert information Error message description (part of errors) There are some error comments on the error detail column as follows; PJ Master update error Global setting error Condition setting error Reading of alert log Page Reading of command history log Updating PJ Master software updating CF SCREEN WIDE%CR MODELNM=PLC-XP50=0&CR STATUS=0=1 Network Board rmware updating Projector rmware updating Page Page Customizing the command list Dene le for projector The default setting in the Dene_PJ.def le is described as follows; Dene le for PDP monitor The default setting in the Dene_PDP.def le is described as follows; Format of the dene le Command name Command Description Predened command list Executing commands Command name Command Response Description Condition check commands and response Create the group information with a text le Network tree data format Practical example of the dened le Chapter 4 Advanced setting ID code Updated Date Telnet password License key Disconnect number Layer Parent ID code IP Address