Sanyo SC-B550R, SC-B551, SC-SC-B555 manual HOW to USE the Hose Stand, Filter Care

HOW TO USE THE HOSE STAND /

1 Shorten the extension	Wind	Hold here
pipe.
		2

2 Stand the vacuum cleaner up and insert the pipe holder into the

pipe-holder hole.

Pipe holder

3 Hold the hose and

1

wind it around the pipe.

Pipe holder hole

Caution

Do not carry the vacuum cleaner while it is in the storage position.

(Injury or damage may result if the hose or coupling pipe becomes unattached.)

FILTER CARE /

When the suction power is low and the dust has been discarded, the filter still should be cleaned.

1. Slide the lever in the direction of
the arrows to remove the dust
by shaking.	Lever

2. Lightly tap the filter to remove the dust.

If you are concerned about dust on the filter:

1. Wash the filter with water.

If the dust is not easily removed, use a brush for removal.

2. Dry the filter thoroughly.

Caution:

Do not dry in direct sunlight or by heating, as the filter may become damage. Never put the filter into the vacuum cleaner unless it is completely dry.

To assure the best results, we recommend cleaning the filters once every one (1) year,

depending on usage.