Epson 3000/3500/3510/3600e manual Solutions to Problems with the Remote Control

•The power cord may be defective. Disconnect the cord and contact Epson.

•If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of inactivity. Press the power button to wake the projector.

•If the projector's lamp shuts off, the Status light is flashing blue, and the Temp light is orange, the projector has overheated and shut off. Check the solutions for this light status.

•If the power button on the remote control does not turn on the projector, check its batteries and make sure the Remote Receiver setting is turned on in the projector's menu, if available.

Parent topic: Solving Projector or Remote Control Operation Problems

Related references

Where to Get Help

Projector Light Status

Related tasks

Unlocking the Projector's Buttons

Solutions to Problems with the Remote Control

If the projector does not respond to remote control commands, try the following solutions:

•Check that the remote control batteries are installed correctly and have power. If necessary, replace the batteries.

•Make sure you are operating the remote control within the reception angle and range of the projector.

•Make sure the projector is not warming up or shutting down.

•Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release the button to wake the remote control up.

•Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the projector's remote receivers. Dim the lights or move the projector away from the sun or interfering equipment.

•If available, turn off one of the remote receivers in the projector's menu system, or check if all the remote receivers were turned off.

•If you assigned an ID number to the remote control to operate multiple projectors, you may need to check or change the ID setting (feature not available with all projectors).

•If you lose the remote control, you can order another one from Epson.

Parent topic: Solving Projector or Remote Control Operation Problems

140