4.Select Reset Lamp Hours and press Enter.

3. Select the Reset menu and press Enter.

4.Select Reset Lamp Hours and press Enter.

You see a prompt asking if you want to reset the lamp hours.

5.Select Yes and press Enter.

6.Press Menu or Esc to exit the menus.

Parent topic: Projector Lamp Maintenance

Replacing the Remote Control Batteries

The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out.

Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.

124

Page 124
Image 124
Epson 3000/3500/3510/3600e manual Replacing the Remote Control Batteries, Select Reset Lamp Hours and press Enter