FCC Compliance Statement, Trademarks | Epson 3000/3500/3510/3600e

medical equipment related to direct medical care, please make your own judgment on this product's suitability after a full evaluation.

Parent topic: Important Safety Instructions

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

For Canadian Users

CAN ICES-3(B)/NMB-3(B)

Parent topic: Notices

Trademarks

EPSON®, EasyMP®, and PowerLite® are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

158

Image 158

Epson 3000/3500/3510/3600e manual FCC Compliance Statement, Trademarks, Parent topic: Important Safety Instructions

Contents

Page Page Contents Wireless Network Projection Using Basic Projector Features Adjusting the Menu Settings Adjusting Projector FeaturesUsing WirelessHD Solving Problems Technical Specifications NoticesPage Page Where to Go for Additional Information Projector FeaturesProjector Features Introduction to Your Projector Optional Equipment and Replacement Parts Product Box ContentsProduct Box Contents Additional Components Warranty and Registration Information Parent topic: Projector Features Additional Components Optional Equipment and Replacement Parts Optional Equipment and Replacement PartsParent topic: Projector Features Related references Notations Used in the Documentation Where to Go for Additional InformationWarranty and Registration Information •epson.com/support U.S or epson.ca/support Canada Projector Part Locations Where to Get HelpProjector Parts - Remote Control Projector Parts - Front/Top 1Lamp cover 2Exhaust vent 3Focus ring 4Lens cap Parent topic Projector Part Locations8Front adjustable foot 9Air filter cover and vent 5Lens 6Zoom ring 7Remote receiver 6Component ports Projector Parts - Rear3Trigger out port 4RS-232C port 12Service port 13Video port 14HDMI 2 port Installing a Security CableProjector Parts - Base Parent topic: Projector Part Locations 1Lamp light Projector Parts - Control PanelProjector Light Status 11Temp light Projector Parts - Remote Control 1On button turns on projector 53D Format button changes the 3D format 25Standby button turns off the projector Parent topic: Projector Part Locations Projector Setup and Installation Options Setting Up the ProjectorProjector Placement Projector Placement Projector Connections Rear Front Ceiling Rear Ceiling Projection Distance Parent topic: Projector PlacementProjector Feature Settings - Settings Menu Vertical lens shift adjustment Horizontal lens shift adjustment 16:9 Aspect Ratio Image or Screen Screen or image size Parent topic Projector Placement 40 inches 101.6 cm Connecting to External Speakers Connecting to Video SourcesConnecting to Computer Sources Connecting to External USB Devices Connecting to an MHL-CompatibleDevice Connecting to Video SourcesConnecting to an HDMI Video Source Connecting to a Component Video Source Connecting to an MHL-CompatibleDevice Parent topic: Connecting to Video SourcesProjector Feature Settings - Settings Menu Related references Parent topic: Connecting to Video Sources Connecting to a Component Video Source Connecting to a Video Source for Sound Parent topic: Connecting to Video SourcesProjector Feature Settings - Settings Menu Parent topic: Connecting to Video Sources Connecting to a Computer for HDMI Video and Audio Connecting to Computer SourcesConnecting to a Computer for VGA Video Connecting to a Computer for Sound Connecting to a Computer for HDMI Video and Audio Parent topic: Connecting to Computer SourcesConnecting to a Computer for Sound Related tasks Connecting to a Computer for Sound Connecting to External SpeakersParent topic Connecting to Computer Sources Parent topic: Connecting to Computer Sources Selecting the Connected USB Source Connecting to External USB DevicesUSB Device Projection Parent topic Projector Connections Related references Supported Slideshow File TypesRelated references Supported Slideshow File Types Parent topic: Connecting to External USB Devices Installing Batteries in the Remote ControlParent topic: Connecting to External USB Devices Parent topic: Setting Up the Projector 2. Insert the batteries with the + and – ends facing as shown Installing the Wireless LAN Module Wireless Network ProjectionInstalling the Wireless LAN Module Selecting Wireless Network Settings Manually Optional Equipment and Replacement Parts Selecting Wireless Network Settings ManuallyParent topic Wireless Network Projection 4.Select Network Configuration and press Enter Parent topic: Wireless Network Projection Wireless LAN Menu SettingsWireless LAN Menu Settings Setting Setting Setting Up Wireless Network Security Selecting Wireless Network Settings in WindowsSelecting Wireless Network Settings in OS Parent topic: Wireless Network Projection Parent topic: Wireless Network Projection Wireless Security Menu SettingsWireless Security Menu Settings Setting Adjusting the Image Position Using Lens Shift Using Basic Projector FeaturesAdjusting the Image Height Focusing the Image Using the Focus Ring 1. Remove the projectors lens cover Selecting an Image Source Parent topic: Using Basic Projector FeaturesTurning Off the Projector Projector Feature Settings - Settings Menu Viewing 3D Images Parent topic: Using Basic Projector Features 3.Begin playback from the video device Pairing the 3D Glasses with the ProjectorCharging the 3D Glasses Parent topic: Viewing 3D Images Pairing the 3D Glasses with the Projector3D Viewing Range Parent topic: Using Basic Projector Features Charging the 3D Glasses Parent topic: Viewing 3D Images Parent topic: Viewing 3D Images Selecting the Language for the Projector Menus3D Viewing Range Adjusting the Image Height Parent topic: Using Basic Projector Features Parent topic: Using Basic Projector Features Adjusting the Image Position Using Lens ShiftImage Shape Adjusting the Image Position Using Lens Shift 1Center of lens 3V × 60% Correcting Image Shape with the Keystone Buttons Image ShapeCorrecting Image Shape with the Keystone Buttons Parent topic: Using Basic Projector Features Parent topic: Image Shape Parent topic: Using Basic Projector Features Focusing the Image Using the Focus RingResizing the Image with the Zoom Ring Vertical Remote Control OperationParent topic: Using Basic Projector Features Horizontal Selecting an Image SourceParent topic: Using Basic Projector Features Projection Modes Changing the Projection Mode Using the MenusChanging the Projection Mode Using the Menus Parent topic Using Basic Projector Features Parent topic: Projection Modes Input Signal Settings - Signal MenuImage Aspect Ratio Changing the Image Aspect Ratio Parent topic: Image Aspect Ratio Changing the Image Aspect RatioAvailable Image Aspect Ratios Aspect ratio setting Changing the Color Mode Available Color Modes Color ModeChanging the Color Mode Turning On Auto Iris Available Color Modes Using Picture in Picture Turning On Auto Iris Parent topic: Using Basic Projector Features Available Picture in Picture OptionsAvailable Picture in Picture Options Setting Supported Slideshow File Types Slideshow Features Controlling the Volume with the Volume ButtonsParent topic: Using Picture in Picture Projecting a Slide Show Starting a Slide Show Slideshow FeaturesSupported Slideshow File Types Parent topic: Projecting a Slide Show 3.Do one of the following to start your slide show Parent topic: Projecting a Slide Show Related tasks Parent topic: Starting a Slide Show Setting Adjusting the Color Convergence Panel Alignment Adjusting Projector FeaturesAdjusting the Color Convergence Panel Alignment Projector Security Features 10.Select Start Adjustments and press Enter You see this screen 11.Press Enter 14.Select Adjust the four corners and press Enter Parent topic: Adjusting Projector Features You see this screen 18.Do one of the following Parent topic Adjusting Projector Features Projector Security FeaturesProjector Memory Options - Memory Menu Parent topic: Adjusting Projector Features Locking the Projectors ButtonsInstalling a Security Cable Parent topic: Locking the Projectors Buttons Installing a Security CableParent topic Projector Security Features Projector Parts - Rear WirelessHD Transmitter Parts Using WirelessHDWirelessHD Transmitter Parts WirelessHD Transmitter Placement Parent topic: Using WirelessHD WirelessHD Transmitter PlacementConnecting the WirelessHD Transmitter Parent topic: Using WirelessHD 1.Plug the AC adapter into the AC input port on the WirelessHD transmitter and into an electrical outlet Parent topic: Using WirelessHD Viewing WirelessHD ContentParent topic: Using WirelessHD Switching WirelessHD Sources Parent topic: Using WirelessHD Using the WirelessHD Picture in Picture FeatureParent topic Using WirelessHD Using the Projectors Menus Adjusting the Menu SettingsUsing the Projectors Menus Image Quality Settings - Image Menu Parent topic: Adjusting the Menu Settings 8.Press Menu or Esc to exit the menus Options Image Quality Settings - Image MenuSetting Description Setting Parent topic: Adjusting the Menu Settings Input Signal Settings - Signal Menu Color Mode Setting Setting Available Image Aspect Ratios Setting AdvancedParent topic: Adjusting the Menu Settings Projector Feature Settings - Settings Menu Viewing 3D Images Setting Setting Setting Setting Locking the Projectors ButtonsUnlocking the Projectors Buttons Parent topic: Adjusting the Menu Settings Parent topic: Adjusting the Menu Settings Projector Memory Options - Memory MenuSetting Description Projector Network Settings - Network Menu Projector Information Display - Info Menu Parent topic: Adjusting the Menu Settings Setting Replacing the Lamp Resetting the Lamp Timer Event ID Code ListEvent ID Code List Parent topic: Adjusting the Menu Settings Projector Reset Options - Reset Menu Parent topic: Adjusting the Menu Settings Language Lamp Hours Memory settings•All settings in the Network menu •Panel Alignment Projector Maintenance Transporting the Projector Projector MaintenanceCleaning the Lens Cleaning the Lens Cleaning the 3D Glasses Parent topic: Projector Maintenance Cleaning the 3D GlassesCleaning the Projector Case Parent topic: Projector Maintenance Parent topic: Projector Maintenance Air Filter and Vent MaintenanceCleaning the Air Filter Replacing the Air Filter Parent topic: Projector Maintenance 3. Pull the air filter out of the projector 4. Tap each side of the air filter 4 to 5 times to shake off any excess dust Related tasks Parent topic: Air Filter and Vent MaintenanceReplacing the Air Filter Replacing the Air Filter 1.Turn off the projector and unplug the power cord 5. Close the air filter cover Parent topic: Air Filter and Vent Maintenance Projector Lamp MaintenanceProjector Lamp Specifications Replacing the Lamp Resetting the Lamp Timer 1.Turn off the projector and unplug the power cord 4. Slide the lamp cover out and lift it off 6. Lift up the lamp handle and gently pull the lamp out of the projector 7.Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way Resetting the Lamp Timer Parent topic: Projector Lamp MaintenanceResetting the Lamp Timer Related tasks Parent topic Projector Lamp Maintenance Replacing the Remote Control Batteries4.Select Reset Lamp Hours and press Enter 1. Open the battery cover as shown 2.Remove the old batteries Parent topic: Projector Maintenance Remote Control SpecificationsTransporting the Projector Page Projection Problem Tips Projector Light Status Solving ProblemsProjection Problem Tips Solving Image or Sound Problems Status and solution Projector Light StatusPower light Status light Status light Power lightStatus and solution Lamp light Solutions When No Signal Message Appears Solving Image or Sound ProblemsSolutions When No Image Appears Solutions When Not Supported Message Appears Solutions When the Image is Fuzzy or Blurry Solutions When No Image AppearsSolutions When the Image Contains Noise or Static Solutions to Sound Problems Displaying From a Mac Laptop Solutions When No Signal Message AppearsDisplaying From a PC Laptop Projector Connections Solutions When the Image is Not Rectangular Solutions When Not Supported Message AppearsSolutions When Only a Partial Image Appears Supported Video Display Formats Adjusting the Image Position Using Lens Shift Solutions When the Image Contains Noise or StaticSolutions When the Image is Fuzzy or Blurry Parent topic: Solving Image or Sound Problems Image Quality Settings - Image Menu Cleaning the LensParent topic: Solving Image or Sound Problems Input Signal Settings - Signal Menu Image Quality Settings - Image Menu Available Color ModesProjector Lamp Maintenance Parent topic Solving Image or Sound Problems Parent topic: Solving Image or Sound Problems Solutions to Sound ProblemsPairing the 3D Glasses with the Projector Projector Feature Settings - Settings Menu Solutions to Problems with the Remote Control Solutions to Projector Power or Shut-OffProblemsSolutions to Projector Power or Shut-OffProblems Parent topic Solving Image or Sound Problems Unlocking the Projectors Buttons Solutions to Problems with the Remote ControlWhere to Get Help Projector Light Status Optional Equipment and Replacement Parts Where to Get HelpRemote Control Operation Projector Light Status Where to Get Help Purchase Supplies and Accessories Parent topic Solving Problems General Projector Specifications Technical SpecificationsGeneral Projector Specifications Projector Dimension Specifications PowerLite Home Cinema 3500/3510/3600e Parent topic: Technical Specifications Projector Lamp SpecificationsRemote Control Specifications Power consumption Parent topic: Technical Specifications Projector Dimension SpecificationsProjector Electrical Specifications Weight PowerLite Home Cinema Projector Environmental SpecificationsPower consumption PowerLite Home Cinema 3500/3510/3600e Parent topic: Technical Specifications Projector Safety and Approvals SpecificationsSupported Video Display Formats Parent topic: Technical Specifications MHL input signals Resolution in pixelsHDMI input signals Display format Display format Parent topic: Technical Specifications HDTV Important Safety Instructions Important Safety InformationRecycling Important Safety Information Notices Important Safety Instructions •Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector 3D Safety Instructions Restriction of Use 3D Safety Instructions Parent topic: Important Safety Instructions Restriction of Use Parent topic: Important Safety Instructions FCC Compliance StatementTrademarks For United States Users Open Source Software License linux-2.6.27 patches udhcp uvc rev.219 Also, for each authors protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors reputations cIf the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else, saying that you provide a warranty and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. Exception if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement so on of the operating system on which the executable runs, unless that component itself accompanies the executable NO WARRANTY END OF TERMS AND CONDITIONS GNU LGPL This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--ofthe Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below We call this license the Lesser General Public License because it does Less to protect the users freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-freeprograms. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances Activities other than copying, distribution and modification are not covered by this License they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it. Whether that is true depends on what the Library does and what the program that uses the Library does In addition, mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute NO WARRANTY END OF TERMS AND CONDITIONS BSD License Berkeley Software Distribution License List of libjpeg programs libjpeg-6b We are required to state that List of libpng programs libpng-1.2.49 John Bowler Kevin Bracey Sam Bushell printf%s,png_get_copyrightNULL jloup@gzip.org Mark Adler Object form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types 4.Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions END OF TERMS AND CONDITIONS List of es-src-29-04-09programs aes-src-29-04-09 1 Red Hat Incorporated The author of this software is David M. Gay 29K Support Products Mail Stop 11 Christopher G. Demetriou San Jose CA USA 13 Royal Institute of Technology 15 Andrey A. Chernov 17S. L. Moshier Author: S. L. Moshier 19 Todd C. Miller 23 Intel Copyright c 1993 Intel Corporation Konstantin Chuguev. All rights reserved 30 - Alex Tatmanjants targets using libc/posix 33 - Daniel Eischen targets using libc/posix All rights reserved 36 - CodeSourcery, Inc MIT License TOPPERS/JSP TINET 6TINET and TOPPERS TINET TCP/IP Protocol Stack Copyright Notice Parent topic: Copyright Notice Copyright AttributionCopyright Attribution Parent topic: Copyright Notice