7HDMI (OUT) port (connects to display devices such as a television)

8HDMI input ports (connect to your input devices; HDMI/MHL port on the side of transmitter)

93D glasses charging port (connects a USB cable to charge the 3D glasses)

10Setup button (press for 5 seconds to reset the transmitter's settings)

11Parent topic: Using WirelessHD power light (lights green when transmitter is operating or turned on; lights orange when the transmitter is on standby)

12WiHD light (lights orange when sending a wireless signal to the projector)

13Link light (lights orange when connected to the projector; flashes orange when searching for the projector or when on standby)

Parent topic: Using WirelessHD

WirelessHD Transmitter Placement

Keep these considerations in mind as you select a WirelessHD transmitter location:

Orient the WirelessHD transmitter so its lights face the front of the projector.

Place the WirelessHD transmitter within 32 feet (10 m) of the projector and in the same room.

Ensure there is a clear path between the projector and the WirelessHD transmitter.

Avoid placing the WirelessHD transmitter in an area with many large or metal objects. Do not place the WirelessHD transmitter on a metal surface, as this may interfere with the signal.

Parent topic: Using WirelessHD

Connecting the WirelessHD Transmitter

You can connect up to five HDMI input sources and one HDMI output source to your WirelessHD transmitter.

85

Page 85
Image 85
Epson 3000/3500/3510/3600e manual WirelessHD Transmitter Placement, Connecting the WirelessHD Transmitter