1. Remove the projector's lens cover.

1. Remove the projector's lens cover.

2. Connect the power cord to the projector's power inlet.

3.Plug the power cord into an electrical outlet.

Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. The projector's power light turns blue. This indicates that the projector is receiving power.

4.Press the power button on the projector or the On button on the remote control to turn on the projector.

The Status light flashes blue as the projector warms up. Once the projector is warmed up, the Status light stops flashing and turns blue.

49

Page 49
Image 49
Epson 3000/3500/3510/3600e manual Remove the projectors lens cover