Epson 3000/3500/3510/3600e manual Solutions When the Image Contains Noise or Static, Image Shape

Models: 3000/3500/3510/3600e

1 205
Download 205 pages 29.78 Kb
Page 135
Image 135

Related concepts

Image Shape

Related tasks

Adjusting the Image Position Using Lens Shift

Solutions When the Image Contains Noise or Static

If the projected image seems to contain electronic interference (noise) or static, try the following solutions:

Check the cables connecting your computer or video source to the projector. They should be:

Separated from the power cord to prevent interference

Securely connected at both ends

Not connected to an extension cable

No longer than 10 feet (3 m) for VGA/computer cables or 24 feet (7.3 m) for HDMI cables

Check the settings on the projector's Signal menu to make sure they match the video source.If available for your video source, adjust the Deinterlacing and Noise Reduction settings.

Select a computer video resolution and refresh rate that are compatible with the projector.

If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality.

If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.

Try a different cable.

Parent topic: Solving Image or Sound Problems

Related references

Image Quality Settings - Image Menu

Input Signal Settings - Signal Menu

Supported Video Display Formats

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

Adjust the image focus.

Clean the projector lens.

135

Page 135
Image 135
Epson 3000/3500/3510/3600e Solutions When the Image Contains Noise or Static, Solutions When the Image is Fuzzy or Blurry