Epson 3000/3500/3510/3600e manual Using the WirelessHD Picture in Picture Feature

3. Press the Input button repeatedly to highlight different input sources.

4.When you have highlighted the source you want to switch to, release the Input button. After a few seconds, the display switches to the highlighted source.

Parent topic: Using WirelessHD

Using the WirelessHD Picture in Picture Feature

If you have connected multiple video sources to the WirelessHD transmitter, you can use the transmitter's Picture in Picture (P-in-P) feature to wirelessly project images from two separate sources at the same time. This feature is independent of any Picture-in-Picture capabilities of your projector.

1.Make sure that the WirelessHD source is selected.

2.Point the remote at the WirelessHD transmitter and press the WirelessHD P-in-Pbutton on the remote control.

3.Do the following to control the P-in-P display:

•Press the Input button on the remote control or the WirelessHD transmitter to change the video source displayed in the sub-screen. Keep pressing the button to cycle through the connected video devices.

•Press the Output button on the remote control or the WirelessHD transmitter to change the position of the sub-screen. The screen moves counterclockwise from corner to corner each time you press the Output button.

•Press and hold the P-in-Pbutton on the remote control to switch the sources shown in the main display and the sub-screen.

4.When you are finished using Picture in Picture, press the WirelessHD P-in-Pbutton on the remote control to resume normal projection.

Parent topic: Using WirelessHD

89