Manual background

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1.Turn off the projector and unplug the power cord.

2.Allow the projector lamp to cool down for at least one hour.

3.Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you open the lamp cover.

119

Page 119
Image 119
Epson 3000/3500/3510/3600e manual Turn off the projector and unplug the power cord