Maytag RCS10DA, RFS manual QuickStartReferenceGuide, So...how do I use it? Mechanical Dial, Heating

QuickStartReferenceGuide

Refer to Product Safety Manual for Safety Statements

Complete Owner’s Manual available online

The switching operation of this microwave oven can cause voltage fluctuations on the supply line. The operation of this oven under unfavorable voltage supply conditions can have adverse effects. This device is intended for the connection to a power supply system with a maximum permissible system impedance Zmax of 0.2 Ohms at the interface point of the user’s supply. The user has to ensure that this device is connected only to a power supply system which fulfills the requirement above. If necessary, the user can ask the public power supply company for the system impedance at the interface point.

	Oven Wall Clearances
	A—For North American (UL/CSA) models,
	allow at least 2” (5.1 cm) of clearance
A	around top of oven. For International (50 Hz)
	models, allow at least 12” (30 cm) of
B	clearance around top of oven. Proper air
	flow around oven cools electrical
C	components. With restricted air flow, oven
	may not operate properly and life of
	electrical parts is reduced.
	B—Allow at least 2” (5.1 cm) between air
	discharge on back of oven and back wall.
	C—Allow at least 2” (5.1 cm) of clearance
	around sides of oven.

DO NOT power spray No metal pans

So...how do I use it? (Mechanical Dial)

Heating

1.Open oven door, place food in oven, and close oven door.

2.Turn time entry knob clockwise to desired time.

•Cooking time can be set up to 6 minutes.

•Oven begins operation and time counts down.

3.When cooking time has elapsed, microwave energy stops and oven signal sounds.

Interrupting Operation

Part No.12804404 Revised 10/04

Open oven door to interrupt operation or turn time entry knob counterclockwise to “0”.

To resume microwave oven operation, close door and turn knob.

Changing Time and Canceling Mistakes

Heating time can be changed at any time while the oven is operating. Turn knob to desired new setting. To set cooking time to zero, turn knob counterclockwise to “0”.

	For full product documentation visit:	♥ 2004 Amana Appliances
™	www.amanacommercial.com/wavelink	Amana, Iowa 52204

A–2 16023293 Rev. 0 ©2004 Maytag Services