Troubleshooting Procedures
Trouble 1: The following visual conditions indicate a probable failed control circuit.
1.Incomplete segments.
•Segment missing.
•Partial segment missing.
•Digit flickering (Note: Slight flickering is normal.)
2.Colon does not turn on or blink.
3.A distinct change in the brightness of one or more numbers in display.
4.One or more digits in the display are not lighting.
5.Display indicates a number different from one touched, for example, key in 5 and 3 appears in the display.
6.Specific numbers (for example 7 or 9) will not display when key pad is touched.
7.Display does not count down with time blinking or up with clock operation.
8.Display obviously jumps in time while counting down.
9.Display counts down too fast while cooking.
10.Each indicator light does not turn on after setting cooking cycle. 11. Display time of day does not reappear when cooking is finished.
Condition | Check | Result | Cause |
| Remedy |
No input can be | Check the connection | • Continuity | • Failed |
| • Replace |
programmed. | between keypad and | • No continuity | controller. |
| controller. |
| controller. |
| • Loose |
| • Repair |
|
|
| connection. |
| connection. |
1. Some inputs | Replace keypad and check | • Everything | • Failed |
| • Replace |
cannot be | operation. | works as | keypad. |
| keypad. |
programmed. |
| specified. |
|
|
|
2.Display shows a number or figure different
from one | • Still have | • Failed | • Replace |
touched. | trouble. | controller. | controller. |
3.Random programming when touching other pads.
4.Display is fixed at some figure and can not accept any input.
12 | 16023293 Rev. 0 | ©2004 Maytag Services |
