Epson 3000/3500/3510/3600e Pairing the 3D Glasses with the Projector, Charging the 3D Glasses

You can purchase Epson RF 3D glasses from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian sales).

1.Connect a 3D-compatible video device to the projector using a compatible HDMI cable.

2.Turn on the video device, then turn on the projector.

3.Begin playback from the video device.

Note: Make sure you set the video device to play content in 3D mode.

4.Press the 2D/3D button on the remote control to activate 3D mode, if necessary.

5. Slide the power switch on the 3D glasses to the On position.

6. Put on the 3D glasses. If you do not see a 3D image, pair the glasses with the projector.

Note: If you change the video source or you are not within range of your projector, the glasses enter standby mode and the status light flashes green. Slide the power switch on the glasses to the Off position and then back to the On position to resume 3D viewing.

Pairing the 3D Glasses with the Projector

Charging the 3D Glasses

52