Epson 3000/3500/3510/3600e manual Projector Reset Options - Reset Menu

Event ID code	Cause and solution
0479	A projector system error has occurred. Turn the projector off and then on again.
04FF
0891	Cannot find an access point with the same SSID. Set your computer, access point,
	and projector to the same SSID.
0892	The WPA/WPA2 authentication type does not match. Make sure the wireless
	network security settings are correct.
0894	Communication with unauthorized access point was disconnected. Contact your
	network administrator.
0898	Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
	If you are not using DHCP, turn off the DHCP setting in the Network menus.
0899	A communication error has occurred. Try restarting the EasyMP Network Projection
	program and restarting your projector. If that does not solve the problem, contact
	Epson for help.

Parent topic: Projector Information Display - Info Menu

Projector Reset Options - Reset Menu

You can reset most of the projector settings to their default values using the Reset All option on the Reset menu.

You can reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option and you can also reset all memory entries using the Reset Memory option.

108