Epson 3000/3500/3510/3600e Power light, Status light, Lamp light, Temp light, Status and solution

Power light	Status light	Lamp light	Temp light	Status and solution
Flashing blue	Varies	Off	Flashing	Projector is too hot
			orange	• Make sure that the vents and air
				filter are not clogged with dust or
				obstructed by nearby objects
				• Clean or replace the air filter
				• Make sure the environmental
				temperature is not too hot
Off	Flashing blue	Off	Orange	Projector has overheated and turned
				off; leave it turned off to cool down for
				about five minutes, then do the
				following:
				• Make sure that the vents and air
				filter are not clogged with dust or
				obstructed by nearby objects
				• Clean or replace the air filter
				• If operating the projector at high
				altitude, turn on High Altitude
				Mode
				• If the problem persists, unplug the
				projector and contact Epson for
				help
Off	Flashing blue	Orange	Off	Lamp has a problem
				• Check to see if the lamp is burned
				out, broken, or installed incorrectly;
				reseat or replace the lamp as
				necessary
				• Clean or replace the air filter
				• If operating the projector at high
				altitude, turn on High Altitude
				Mode
				• If the problem persists, unplug the
				projector and contact Epson for
				help

130