Saving a Phone Number

Your phone can store a total of 500 phone numbers in

300 Internal Phone Book entries. Each Phone Book entry can store seven phone numbers, and the entry’s name can contain 16 characters. Your phone automatically sorts the Internal Phone Book entries alphabetically.

To save a number from the standby mode:

1.Enter a phone number.

2.Press .

3.Highlight Save Phone# and press .

4.Select a label by highlighting Home, Work, Mobile, Pager, Data,

Fax or No Label and press .

5.Enter a Name and press . (See “Selecting a Character Input Mode” on page 50.) Or you can also save the phone

number without a name by pressing from the name

entry display, highlighting Yes and then pressing . If you have already stored entries in the Phone Book, you are prompted to select the following entry modes:

New Name to enter a name directly.

From Phone Book to select a name from Phone Book entry list.

6.Press Save (left softkey).

After you have saved the number, the new Internal Phone Book entry is displayed. (See “Internal Phone Book Entry Options” on page 49.)

Finding a Phone Number

You can search Internal Phone Book entries for phone numbers that ends with the digits you entered.

To find a phone number:

1.Enter the last four or more digits of the number and press . The more numbers you enter, the more specific the search becomes.

2.Highlight Find and press .

3.The Phone Book entry list that ends with the digits you entered appears.

4.Highlight your desired entry.

Press to display the entry details.

Press to dial.

Dialling and Saving Phone Numbers With Pauses

You can dial or save phone numbers with pauses for use with automated systems, such as voicemail or credit card billing numbers. If you select a hard pause, the next set of numbers are

sent when you press . If you select a 2-second pause, your phone automatically sends the next set of numbers after two seconds.

Note: You can have multiple pauses in a phone number and combine 2-second and hard pauses.

To dial or save phone numbers with pauses:

1.Enter the phone number and press .

2.Highlight either Hard Pause or 2-Sec. Pause and press . Hard Pauses are displayed as a “H” and 2-second pauses as a “T”.

3.Enter additional numbers.

4.Press , highlight Call to dial the number or Save Phone# to

save the number in your Internal Phone Book and press .

When dialling a number with a hard pause, press (or press

and highlight Send Tone and press ) to send the next set of numbers.

14

15

Page 12
Image 12
Sanyo SCP-8100 manual Saving a Phone Number, Finding a Phone Number, Dialling and Saving Phone Numbers With Pauses