FEATURES
•Microprocessor Controlled Operation
•
•
•Night Setback
•Automatic and
•Air Sweep Control
•Automatic Restart Function for Power Failure
•Automatic Switching between Cooling and Heating
(This function is available only for “Single use” of COOL/DRY/ HEAT Model.)
•Hot Start Heating System
(This function is available only for COOL/DRY/HEAT Model.)
NOTE
•Since the wired remote controller is designed to be commonly used for various air conditioners, some of the functions of the wireless remote controller supplied with the indoor unit cannot be used.
•“Single use” means that only one indoor unit is connected with one outdoor unit in a
•“Multiple use” (i.e.
REMOTE CONTROL UNIT (DISPLAY)
Displayed when indoor unit sensor is in use
Displayed when operating NIGHT
SETBACK mode
Displayed when setting
temperature
Displayed when temperature is shown
Displayed when setting timer
Symbols
(1)Operation mode
AUTO .....................................
(only for COOL/DRY/HEAT Model)
HEAT ......................................
(only for COOL/DRY/HEAT Model)
MILD DRY ..............................
COOL .....................................
FAN ........................................
(2)Fan speed
Automatic operation ...............
(3)Temperature setting
60 – 86 °F ..............................
When set to 80 °F temperature indication ...........
(4)Timer
ON Timer. ..............................
OFF Timer. ............................
HIGH .....................................
(5) NIGHT SETBACK..................
MEDIUM.................................
(6) Flap angle indication..............
LOW .......................................
Sweep indication....................
3 | |
|
