![3.7.3Connecting cases (End cases)](/images/new-backgrounds/62069/6206921x1.webp)
3.7.3Connecting cases (End cases)
①Apply gasket as shown at right.
②Partially set M8 bolts in place at the four positions shown at right, insert through connecting holes in the sides of
③Fix the end case in position with the M8 bolts.
④Fix the hand rail joints in place.
⑤Fix the bumper joints in place.
Gasket
Note: Gasket ends that are open must be sealed off by applying silicone at the installation site.
11