Sanyo VCC-4324 instruction manual Mounting the Lens, Pin layout DC type lenses Video type lenses

MOUNTING THE LENS

4

DC

VIDEO

13

2 4

4Set the A.I. LENS switch in the camera setup section to the VIDEO position.

Pin layout

	DC type lenses	VIDEO type lenses
1	Brake coil (–)	+12 V DC (50 mA max.)
2	Brake coil (+)	Not used
3	Drive coil (+)	Video output (1.0 Vp-p, high impedance)
4	Drive coil (–)	Ground (for video signal and DC power)

Compatible auto-iris lenses

1/3 inch Sanyo DC type lens	1/2 or 2/3 inch VIDEO type lens
VCL-CS8LY: Standard angle, f= 8 mm	Standard angle, f= 9 mm
VCL-CS4LY: Wide angle, f= 4 mm	Telephoto angle, f= 12 mm
VCL-CS2LY: Ultra-wide angle, f= 2.8 mm	More telephoto angle, f= 16 mm

If using a VIDEO type auto-iris lens

•Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should be turned all the way to Av (Average).

•Depending on the type of lens used, the lens may not perform properly. In such a case, adjust the LEVEL volume on the lens casing to correct.

English 9