Sanyo VCC-4324 instruction manual Parts Names

PARTS NAMES

6

a b de f g

6Camera setup section (under the cover)

This unit factory settings are as indicated below. These settings are for when using a 1/3 inch CS mount DC (without EE internal amplifier) type lens. However, if due to installation conditions or environment the settings may need to be modified for best results (see "SETTINGS"). To access the controls, remove the cover fixing screw, then remove the cover.

Control name	Position
a Color and Black/White level switch (C-BW)	L
b Internal/Line lock switch (SYNC)	INT
c Red and Blue color adjustment volume (R, B)	about center
d White balance switch (WB)	A

C-BW L-L

H

L

INT

SYNC

	WB EI
	A
	ON
	OFF
	ON
	M
	BLC
R	B
VR303	VR302

VR301

LEVEL

L H

DC VIDEO

A.I.

LENS

e Electronic iris (EI)/Backlight compensation (BLC) switch	OFF
f Auto-iris lens switch (A.I. LENS)	DC
g Lens iris level volume (LEVEL)	about center

Notes:

c

•The EI/BLC switch cannot be used simultaneously.

•When using a 1/2 or 2/3 inch C mount VIDEO (with EE internal amplifier) auto-iris type lens, set the A.I. LENS switch to the VIDEO position.

•If not using an auto-iris lens, make sure the BLC switch is set to OFF.

English 5