CONNECTIONS AND INSTALLATION

2Install the camera unit onto the base.

Connect the video signal cable plug (B) and the power supply cable plug (C) from the base to their respective connectors on the camera unit. Then install the camera unit onto the base.

3Securely tighten the four camera unit fixing screws (D) evenly.

Camera removal

1Loosen the four camera unit fixing screws (A) evenly.

2Turn the camera unit of about 80˚, in the direction of the arrow shown on the illustration.

Turn the camera unit all the way until screw (B) on the base reaches the tab.

3Remove the camera unit.

To remove the camera unit, carefully apply a slight force until the screw (B) goes over the tab, then carefully remove the camera unit.

CAUTION:

•When removing the camera unit, be careful not to hurt yourself with the camera unit fixing screws.

•When removing the camera unit, be careful as the video signal plug (B) or power supply plug (C) cables are short and may become unplugged.

B

C

AA

A B A

B