Installation

1

2

Ceiling

3

Pattern sheet (supplied)

4

5

(D)

5Mount the camera by aligning the triangular marks (▲), then rotate the camera in the arrow

(D) direction.

¥Make sure the camera is securely mounted.

6Open the side cover and tighten the fall-prevention screw (E) using the supplied hexagonal wrench (F).

¥ When Þ nished, make sure to put the cover back.

(F)

(E)

¥The surface of the camera can be hot during operation, but it is not a malfunction.

When you touch the heated portion of the camera for a long time during installation, adjustment or dismounting, you may get a low-temperature burn.

¥SD card may be hot immediately after use. When you remove a SD card from the camera, be absolutely sure to turn it off and wait until it is completely cooled down.

10