Network Settings
Preparing Your Computer for Network Operation
1Check your operating environment. (
Page 1)
2Connect the camera to the network to which your PC is also connected.
3Configue the network information on your PC. Configure information such as the IP address of your PC.
4Install the “H.264
5Start Internet Explorer.
The supported Web browser is Internet Explorer Ver.6.0 SP2 or higher, or Internet Explorer Ver.7.0.
6Access the camera from your Web browser.
From your Web browser (Internet Explorer), access the camera and log into the system as an ÒadminÓ user (administrator).
7In the address bar, type the IP address of the camera and press [Enter] key. When you access the camera, the login screen appears.
If this is the first access to the camera, in the Address bar, enter the default IP address as follows.
If you set [SSL] to “ON”, before the IP address, type “https://” (instead of “http://”).
Attempts to access the camera using the default IP address will fail if that address is already being used by another device in the network.
If so, change the IP address of the existing device before accessing the camera.
8Type your user name and password and click [OK]. The language selection screen appears.
If this is the first access to the camera, log in as an admin user (administrator) using the following default authentication information.
¥User name: admin
¥Password: admin
9Click the button corresponding to the language you want to use. The live screen appears.
From the second login onwards, the live screen appears automatically by skipping the language selection screen.
If this is the first access to the camera, configure the system clock on the CLOCK SETTINGS screen.
13