English Français Deutsch
INSTRUCTION MANUAL |
|
|
|
COLOR CCD Camera |
|
|
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
This instruction manual covers the following models. Any difference among the three models is indicated when necessary.
Dimensions: mm (inches)
|
| 140.2 (5.5) |
(3.6) | 46.2 (1.8) | 30.0 (1.2) |
91.5 |
|
|
Depending on the conditions of use, installation and environment, please be sure to make the appropriate settings and adjustments. If you need help with installation and/or settings, please consult your dealer or an Authorized Sanyo Service Center.
Please note:
Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their
Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
This symbol mark and recycle system are applied only to EU countries and not applied to countries in other areas of the world.
PRECAUTIONS
■In case of a problem
Do not use the unit if smoke or a strange odor comes from the unit, or if it seems not to function correctly. Turn off the power immediately and disconnect the power cord, and then consult your dealer or an Authorized Sanyo Service Center.
■Do not open or modify
Do not open the cabinet, as it may be dangerous and cause damage to the unit. For repairs, consult your dealer or an Authorized Sanyo Service Center.
■Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside the unit. If used with a foreign object inside, it could cause a fire, a
■Be careful when handling the unit
To prevent damage, do not drop the unit or subject it to strong shock or vibration.
■Do not install this unit close to magnetic fields
The magnetic fields may result in unstable operation.
■Protect from humidity and dust
To prevent damage, do not install the unit where there is greasy smoke or steam, where the humidity may get too high, or where there is a lot of dust.
TROUBLESHOOTING
Before sending the camera out for repair, check the items below. If the problem persists after checking these items, consult your dealer or an Authorized Sanyo Service Center.
■If no image appears
Is the coaxial cable attached securely?
Are the power and voltage normal?
SPECIFICATIONS |
| |||
|
|
|
| |
| ||||
Scanning system | PAL standard 625 lines, 50 fields/sec. | |||
Image sensor | 1/3" interline transfer method CCD | |||
Number of effective |
| 752 (H) x 582 (V) |
| |
pixels |
|
| ||
|
|
| ||
Horizontal resolution | More than 520 TV lines | More than | ||
480 TV lines | ||||
|
|
| ||
Minimum illumination |
| 0.05 lx |
| |
1.0 lx (F1.4) | (F1.4, B/W mode) | 1.0 lx (F1.4) | ||
INSTALLATION
| (H) |
(H) | (G) |
| |
| (J) |
| (I) |
82.588.0
(E) 
Has the iris of the lens been adjusted correctly (with the level volume)?
(approx.) | 1.0 lx |
| (F1.4, color mode) |
Video output | 1.0 |
(F)
88.0
Is there adequate illumination?
■If the image is unclear
Is the monitor adjusted correctly?
Video S/N ratio | More than 50 dB (AGC off) |
| |
Lens | |||
Pan/Tilt adjustment | Pan: ±180º, Tilt: ±60º (Ceiling Installed) | ||
Backlight compensation | OFF / ON (Center zone metering) |
| – |
Iris setting | AI / EI (Only AI is available for the | ||
(A)
(B)
46.0
(M)
Is the lens in focus? Is the lens clean?
Dirt or fingerprints on the lens can adversely affect the image. Gently wipe any dirt or fingerprints off the lens with a soft cloth or lens cleaning paper and cleaning fluid (commercially available).
SERVICE
The camera is a precision instrument. Handle it carefully and always follow the safety precautions. If the camera requires service, never try to repair it yourself or open the casing.
For servicing, maintenance, or repairs, consult your dealer or an Authorized Sanyo Service Center.
White balance | ATW / | ATW / | |||
Gain control |
| ON / OFF |
|
| |
Wide dynamic range | – | – | ON / OFF | ||
Dynamic range | – | – | 54 dB typical | ||
Sync system | DC 12 V user: | Internal sync, AC 24 V user: | |||
Day/Night function | – | Always active |
| – | |
| Temperature: | ||||
Operating environment | (14 - 104°F) | ||||
|
| ||||
| Humidity: less than 90% RH (no | condensation) | |||
Power supply | 24 V AC ±10%, 50 Hz/12 - 15 V DC | ||||
Power consumption | 2.6 W | 2.6 W |
| 4.0 W | |
(approx.) |
| ||||
|
|
|
| ||
Weight (approx.) |
| 850 g (30 oz) |
|
| |
| Hexagonal wrench, Large, Medium and Small | ....... each1 | |||
| Rubber cushion............................................................... |
|
| 1 | |
Accessories | Mounting screw............................................................... |
|
| 4 | |
| Screw hold ...................................................................... |
|
| 4 | |
| Mounting template .......................................................... |
|
| 1 | |
The factory setting value is represented in bold.
Appearance and specifications are subject to change without prior notice.
(K)
(D)
(L)
(N)
(C)
Since the conduit hole cover is not
Make sure to perform waterproofing properly to the ceiling or wall where you are installing the unit.
When setting up this camera, make sure that it is installed securely. Check that the installation location is strong enough to bear the camera weight before proceeding. Install on a ceiling or wall that has no surface unevenness. In addition, do not touch the camera unit except when settings and adjustments are necessary.