USING THE CAMERA WITH A COMPUTER

3Set the selector dial to [Ü], and
turn on the power.
œMore information about these
operations can be found in the
instruction manual accompanying
the included Sanyo Utility Software.
NOTE
œWhen your digital camera is connected to a computer, there is no display
on the LCD monitor.

Using the camera as a PC camera

By connecting your digital camera to a personal computer, you can broadcast
(remote photography, TV telephone, etc.) images taken with your camera
over the Internet (PC camera function).
1Connect the digital camera to a personal computer.
œThe connection procedure is the same as step 1 and 2 on page 150.
2Set the selector dial to [â].
œFor the rest of the procedure, please refer to the instruction manual for
the application software you are using for the PC camera.
CAUTION
œThe PC camera function can be used only with computers in which
Windows XP was preinstalled.
œThe zoom cannot be used with the PC camera function. Moreover, only
images can be recorded; audio data cannot be recorded.
œAlthough your camera can shoot at a maximum rate of 15 frames per
second, the rate at which you can broadcast may be less than this
depending on the speed of your Internet connection.
Selector dial
Power button
SX515/EX, U (VPC-AZ3 GB) Tue. Oct., 22/2002
151 English