Sanyo VPC-CA65GX Date and time setting, Screen display, Operation sounds setting, Post-view

1Date and time setting

(page 32)

hSet the camera’s internal clock.

2 Screen display (page 35)

h Specify whether the time/date the image was captured is displayed.

h Specify what information is displayed on the Playback Screen.

3 Startup display (page 123) h Select the screen display that

appears when the camera is turned on.

4 Operation sounds setting (page 124)

h Select the operation sounds that are produced when the camera’s buttons are pressed, and adjust the operation sound volume.

5 Post-view (page 127)

h Specify how long the captured

image is displayed on the

monitor after the [ ] button is pressed and released.

6 Recording folder (page 128) h Create/select a folder in which

to store the recorded files.

7 Noise-reduction menu (page 129)

h Select the settings to reduce the noise that is generated during audio or still image recording.

8 Image quality adjustment (page 131)

h Adjust the image quality during shooting.

9Flicker-reduction menu (page 132)

h Set the flicker-reduction function on or off.

0Digital zoom setting (page 133)

h Enable or disable the digital zoom.

AShortcuts (page 134)

hAssign operation functions to the [G] and [H] buttons when

the Shooting Screen is active.

BMonitor brightness (page 136) h Adjust the brightness of the

monitor.

CScreen language (page 137) h Select the language in which the monitor messages are

displayed.

DTV system settings (page 138) h Select the type of video signal that is output from the camera’s

AV terminal.

EPower save function (page 139)

FFile number memory (page 141)

h Select the file number memory

function.

GFormat (page 144)

hReformat the camera’s internal

memory or the card installed in the camera.

HSettings reset (page 146) h Reset the camera to the factory-preset settings.

IRemaining battery power (page 148)

*Icons 7 through H are displayed when you press the [T] or [W] button to scroll.

English 122