Sanyo VPC-CA65GX Allow the water to drain out through the drainage holes, Dry the camera

AFTER USING THE CAMERA IN WATER

After using the camera in water, wash it with fresh water and dry it completely.

1 Turn off the camera, and close the battery/card compartment cover securely.

2 Wash the camera with fresh water.

hFill a shallow basin with fresh water, and immerse the closed camera for about 5 minutes. Rotate the monitor unit several times to clean it completely.

3 Allow the water to drain out through the drainage holes.

hDrain the water through the five drainage holes.

Monitor unit Monitor unit

Drainage hole

Drainage hole

Drainage hole

4 Dry the camera.

hUse a dry cloth to wipe off any drops adhering to the camera, and leave it to dry completely in a well-ventilated place away from direct sunlight.

hWater may seep out from the drainage holes if the camera is not completely dry inside. Take special care not to let water get inside the battery/card compartment.

hDo not use a hair dryer or the like to dry the camera. Exposing the camera to high temperatures may cause the camera and/or waterproof seal to become deformed.

English 60