Sanyo VPC-CA65EX, VPC-CA65GX Operation Sounds, If Turn ON/OFF or Audio Guide is selected

OPERATION SOUNDS

3 Select “CHANGE SETTINGS”, and
	OPERATION BEEP
press the SET button.
h The screen to change the settings	TURN ON/OFF	ON
appears.	SHUTTER	D
	KEY SW	A
	AUDIO GUIDE	ON
4 Press the [T] or [W] button to select
	OPERATION VOL	4
the desired setting, and press the	OK
SET button.

hThe screen to select operation sounds appears.

<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>

hThe respective screen to enable or disable the sound appears. h Press the [T] or [W] button to select the desired setting, and press

the SET button.

ON: Activates the sound.

OFF: Deactivates the sound.

<If “SHUTTER” or “KEY SW” is selected>

hThe screen to select the operation sounds appears. h Select from 8 different sounds (A to H).

h You can press the [H] button to preview the selected operation sound.

h If “OFF” is selected, no sound is produced.

h Press the [T] or [W] button to select the desired setting, and press

the SET button.

<If “OPERATION VOL” is selected>

hThe screen to select the volume for the operation sounds appears. h You can select an operation sound volume from 1 (minimum) to 7

(maximum).

h Press the [T] or [W] button to select the volume, and press the SET button.

125English