CONNECTING TO A TV

Playback

i After connecting the digital camera to the television, set the TV input switch to VIDEO input.

i When an S-AV interface cable is connected, no image appears on the camera’s monitor.

i The playback method is the same as when viewing images on the camera’s monitor.

Audio playback: see page 58

i The remote control unit can be used for playback (page 59).

i The same playback procedure as when playing back with the camera is used to play back audio recordings as well.

CAUTION

Insert and pull out the cable carefully

i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket.

i Do not use excessive force when connecting and disconnecting cables.

HINT

About the display when the “PAL” TV system is selected (page 133) and the supplied S-AV interface cable is used to connect the camera to the

TV

During recording:The image appears on the monitor only; it does not appear on the TV.

During playback: The image appears on the TV only; it does not appear on the monitor.

151English

Page 157
Image 157
Sanyo VPC-HD1EX Connecting to a TV, Playback, Audio playback see, Insert and pull out the cable carefully