Sanyo VPC-HD1EX Date and time setting, Operation sounds setting, Wind noise reduction setting

1Date and time setting

(page 36)

hSet the camera’s internal clock.

2 Operation sounds setting (page 121)

h Select the operation sounds that are produced when the camera’s buttons are pressed, and adjust the operation sound volume.

3 Help display setting (page 123) h Turn the help display on or off.

4 Post-view (page 124)

h Specify how long the captured image is displayed on the monitor after the still image shooting button is pressed.

5 Wind noise reduction setting (page 125)

h Set the wind noise reduction function on or off.

6 Noise-reduction (page 126) h Set the noise-reduction function on or off.

7 Image quality adjustment (page 127)

h Adjust the image quality during shooting.

8 Flicker-reduction (page 128) h Set the flicker-reduction

function on or off.

9 Digital zoom setting (page 129) h Enable or disable the digital

zoom.

0Monitor brightness (page 130) h Adjust the brightness of the

monitor.

AExternal microphone (page 131) h Adjust the input level of a

microphone connected to the camera.

BScreen language (page 132) h Select the language in which the monitor messages are

displayed.

CTV output settings (page 133) h Select the type of video signal that is output from the camera’s

USB/AV terminal.

DPower save function (page 137) E File number reset (page 139)

h Select the file number reset function.

F Card format (page 142)

h Use the camera to format the memory card.

G Reset camera settings (page 144)

h Reset the camera to the factory-preset settings.

H Remaining battery power (page 147)

*Icons 7 through G are displayed when you toggle the SET button up or down to scroll.

English 120