Sanyo VPC-HD1E Select EXIT, and press the SET button, To correct the date and time settings

hIf “DISP OFF” is selected, the date the image was captured is not shown during playback.

4Press the SET button.

6 Select “EXIT”, and press the SET button.

hThe date and time setting is completed, and you are returned to the

Option Screen.

hTo return to the Shooting or Playback Screen, press the MENU button.

HINT

i Under normal conditions, while the battery pack is being replaced, an internal battery will maintain the date and time settings. However, there is a small chance the settings may be lost (The backup will last for about 7 days). It is recommended to check that the date and time settings are still correct after replacing the battery pack and before shooting or recording of any type (follow steps 1 and 2).

To correct the date and time settings

i After steps 1 and 2, select the line of the setting that you want to change, press the SET button, and follow the steps in the respective paragraphs above to change the setting.

English 38