Bosch Appliances VMD01 M50 PAL Notes, 8.1General, English, Reset to default setting, Cleaning

8 Notes

English

8.1General

If errors or malfunctions occur, the plug-in connectors should be checked first. A malfunction can sometimes be cured by briefly unplugging and re-plugging the power cord on the unit.

The unit may not be opened. Guarantee claims are rendered invalid if the seal is broken.

Description of the LEDs: See the Functions chapter.

Superimposed malfunction indications for video signal malfunctions

= Camera blinded

= Scene lighting level too low

= Signal/noise ratio too low

= No video signal present

Reset to default setting

Unplug contact plugs and power supply from unit. Keep rotary switch pressed, plug power supply back in. The green LED lights. Keep the rotary switch pressed until the red LED lights (or blinks if an object is detected simultaneously). Immediately rotate the still-pressed rotary switch, wait until the red LED goes out and release the rotary switch. When the live image appears, the reset procedure is finished.

Notes

The video movement sensor is delivered with software already installed. For questions about the product, please consult your dealer.

Cleaning

Protect the unit from dust and moisture. Do not use aggressive cleaning agents.

All unusable parts of the video systems must be professionally

disposed of.

– 19 – A1 February 03/Trb